|Home||» Products||» Emulsion Paints||» Semi Glossy Paint|
Semi Glossy Paint
- Unit of Measure
We have attained a notable position in the market by involved in manufacturing and supplying quality assured range of Semi Glossy Sheen Effect. It is suitable to be used for all types of common porous building substrates brick, pavers, stone, concrete, rood terrace, damp wall interior, exterior toilet and kitchen walls. This Semi Glossy Sheen Effect is highly resistant to wind driven rain, non-darkening, alkaline resistant and longer service life. Moreover, it is easy to apply with roller, brush and spray.
Wall Protector Semi Glossy Effect
Purpose Of Using
Used For All Types Of Common Porous Building Substrates Brick, Stone, Concrete, Pavers, Roof Terrace, Damp Walls Interior, Exterior As A Primer Before Painting Interior, Exterior Toilet And Kitchen Walls, Coating On Walls Of Breweries And Food Processing Industries, As A Primer Application Of Coating In Food And Drug Industries. As A Putty With Grey Cement To Till The Fine Cracks Of External Walls, Hatcheries And Aqua Forms. Natural Stones, Pre- Fabricated Components Concrete Facings Building, Clinker Brick Work
Resistance To Wind Driven Rain
Long Service Life
Method Of Application
On New Surface Directly Apply One Brush Coat Of Ready Mix Liquid Artist Wall Protector And Allow It To Cure For 3hours. And Apply 2nd Coat And Allow To Dry For Minimum 24 Hours Before Painting.
In Case Of Several Leakage Problem Due To More Cracks On The Wall Surface Apply Wall Protector Liquid Paste Along With Grey Or White Cement In The Dilution Of 1:3 Basis.
Old Surfaces And Water Tanks
In case Of Old Wall Surfaces Water Tanks For Not To Get More Cracks, Leakage, Dampness, Moisture Apply Wall Protector Liquid Paste Adding With Grey Or Whi9te Cement In The Dilution Of 1:2 Basis Before Filling For Drinking Water Wash The Tank Surface With Water.
Can Be Over Coated By Solvent And Water Based Paints.
Method Of Application
Brush, Roller, Spray
On Any Surface 210 Sft Per Ltr Per Coat Coverage Figures May Vary Depending Upon Porocity And Roughness of The Surface.
Store The Material At Coolant Dry Places Below 24ÃâÃ°c Temperature
500ml, 1ltr, 4ltrs, 10 And 20 Ltrs.